Cabletron Systems CSMIM-T1, Руководство администратора, Страница: 362 / 418

Chapter 19 Annex Parameters
19-62 CSMIM/Micro-CS Management Application Guide
active on ports that do not have a DSR signal (ports with partial modem
control lines).
net_inactivity
defines the amount of time an asynchronous interface port can remain
inactive before the port is reset. The
net_inactivity_units
parameter determines
whether the number you enter here is in minutes or seconds.
net_inactivity_units
determines the unit of time used for the port’s serial protocol inactivity timer.
network_turnaround
controls the number of seconds that an Annex waits for a response from a
security server. An algorithm defines the actual time, which is usually longer
than the number of seconds in this parameter. This parameter works only
when
enable_security
is set to
enabled
.
You should not enter a high number here unless you need
a long timeout for contacting a slow host or for waiting
for a slow host’s response to a security request.
Type Async
Values enabled or disabled
Default disabled
Lists Async Port, Flow Control, Modem
Type Async
Values 0 to 255
Default 0
Lists Async Ports, Idle Timer, PPP, SLIP
Type Async
Values minutes or seconds
Default minutes
Lists Async Port, PPP, SLIP
Type Annex
Values 1 to 255 seconds
Default 2 seconds
Lists Annex Only, Security