Cabletron Systems CSMIM-T1, Руководство администратора, Страница: 391 / 418

CSMIM/Micro-CS Management Application Guide 19-91
For more information about event logging, please refer to the
CSMIM/MicroCS Administrator’s Guide for UNIX.
syslog_port
routes syslog messages to an asynchronous port where messages are
time and date stamped. You can enter
0
for syslogging to take place over
the network, or a number to indicate the port to which syslog messages
are sent.
t1_info
contains information about the T1 line supplied by the telephone company.
tcp_keepalive
specifies the length of time a TCP connection must be idle before an Annex
sends keep-alive messages. A keep-alive message contains no data, but
solicits an acknowledgment from the other end of a connection to determine
whether the connection is still active. If the recipient does not acknowledge
the message after eight retries, the Annex drops the connection. You can
use
0
(Annex Manager’s default value) to set the keep-alive time to 120
minutes, or you can enter
255
to disable the keep-alive mechanism. The
port_tcp_keepalive
and
printer_tcp_keepalive
parameters override values in this
parameter for those individual ports.
Type Annex
Values
emergency, alert, critical, error, warning, notice, info, debug,
all, none
Default none (disables logging)
Lists Annex Only, SysLog
Type Annex
Values 0 or a port number
Default 0
Lists Annex Only, SysLog
Type T1 DS1
Values 0 to 16 characters
Default n/a
Lists T1_DS1
Type Annex
Values 0 to 255 minutes
Default 0 minutes
Lists Annex Only, Basic Annex