Cabletron Systems CSMIM-T1, Руководство администратора, Страница: 321 / 418

CSMIM/Micro-CS Management Application Guide 19-21
CallDef_mode
sets the mode for access to an ISDN Primary Rate Annex. For more
information about modes, see the
CSMIM/MicroCS Administrator’s Guide
for UNIX and the Annex Administrator’s Guide for DOS. You can enter:
❑
cli
to allow a dialed terminal or incoming modem access to CLI.
CLI provides access to the network and connections to other
hosts via the
telnet
,
connect
,
rlogin
and
tn3270
commands
.
The
tn3270
command is available only when
option_key
is set to an appropriate value.
❑
slip
to specify that a connection can perform as a network
interface using SLIP. IP packets are encapsulated by SLIP.
❑
ppp
to specify that a connection can perform as a network
interface using PPP. IP packets are encapsulated by PPP.
❑
arap
to specify that a connection can perform as a network
interface using ARAP.
❑
auto-detect
to allow an ISDN Primary Rate Annex to identify an
incoming packet’s protocol as IPX, PPP, ARAP or CLI.
❑
ipx
to allow dial-in Novell access.
❑
connect
to allow an ISDN Primary Rate Annex to communicate
with a LAT host via the
connect
command. This option works with
the
CallDef_dedicated_arguments
parameter
.
❑
rlogin
to allow
an ISDN Primary Rate Annex
to communicate via
the
rlogin
command. This option works with the
CallDef_dedicated_arguments
parameter.
❑
telnet
to allow an ISDN Primary Rate Annex to communicate
via the
telnet
command. This option works with the
CallDef_dedicated_arguments
parameter.
❑
tn3270
to allow an ISDN Primary Rate Annex to communicate
via the
tn3270
command. This option works with the
CallDef_dedicated_arguments
parameter .
Type Annex
Values
cli, slip, ppp, arap, auto-detect, ipx, connect, rlogin, telnet,
tn3270
Default cli
Lists
Annex Only, AppleTalk, Basic Async Port, Modem, PPP,
SLIP, Call Defaults, Sync Call Defaults