manualshive.com logo in svg

Cabletron Systems CSMIM-T1, Руководство администратора, Страница: 403 / 418

Поделиться
Скачать
Cabletron Systems CSMIM-T1 Скачать руководство пользователя страница 403

CSMIM/Micro-CS Management Application Guide

20-3

Show and Set Commands

Annex Manager may prevent you from changing parameter values based 
on the value of the 

allow_snmp_sets

 parameter. If 

allow_snmp_sets

 is set to 

disabled

, 

you can use the 

telnet

 command to reach the Annex and run the 

superuser

 

admin CLI

 command to set 

allow_snmp_sets

 to 

yes

.

The Annex default value does not allow changes to configuration 
parameters through SNMP. Annex Manager and the Annex SNMP agent 
use SNMP version 1. The only security check performed by the SNMP 
agent is to match the community string in an incoming SNMP packet with 
the defined community strings for the Annex. Since the community string 
in the SNMP packet is transmitted in the clear, there is a potential security 
risk in allowing changes to the configuration through SNMP messages. If 
you wish to configure the Annex using Annex Manager, please be aware 
of this situation.

Returning to Previous Setup mode Window

Because Setup mode windows display based on your selections in previous 
windows, you cannot display a second window and then return to another 
window. For example, you must close the 

General (continued

) window in order 

to return to the 

General

 window. In addition, you must close all Setup mode 

windows to return to the main window.

Saving All Configuration Parameters

To save all parameter values for an Annex, use the 

Create Script

 command 

and select all parameters and all ports on the Annex. This may take some 
time for Annexes with a large number of asynchronous ports.

Saving Parameters in Scripts

Some Annex configuration parameters include sensitive information. These 
parameters include all the Annex and port password parameters, the option 
key that applies only for a specific Annex, and the Annex's IP address.

Содержание CSMIM-T1



































































































































































































































































































































































































































Отзывы:

Нет отзывов