Cabletron Systems CSMIM-T1, Руководство администратора, Страница: 344 / 418

Chapter 19 Annex Parameters
19-44 CSMIM/Micro-CS Management Application Guide
than one letter or number, Annex Manager separates characters with a
slash (/). For example, +
a
+
b
, displays as
^a/b
.
forwarding_count
controls Annex port behavior for received characters. If you enter a number
other than
0
, the port does not forward characters until it receives the
number of characters you entered. If you enter
0
, the port uses values in
forwarding_timer
. If you use
forwarding_count
and
forwarding_timer
parameters, the
Annex uses the value that occurs first.
Setting
forwarding_count
to
1
or
forwarding_timer
to
0
may have
a severe effect on the network when heavy serial input
occurs.
forwarding_timer
sets the amount of time in ten millisecond intervals that can elapse before
an Annex forwards received data. If new data arrives before the timer
expires, the Annex resets the timer. If you enter
0
, the Annex uses
5
, which
is Annex Manager’s default value.
Setting
forwarding_count
to
1
or
forwarding_timer
to
0
may have
a severe effect on the network when heavy serial input
occurs.
group_value
specifies the LAT protocol remote group codes that can access local
services offered by an Annex. To access these services, the Annex must
have at least one enabled group code that matches the service’s group
Type Async
Values 0 to 16 characters
Default “ “ (null string)
Lists Async Port, vci_interface
Type Async
Values 0 to 255
Default 0
Lists Async Port, Idle Timer
Type Async
Values 0 to 255 tens of milliseconds
Default 5 (50 milliseconds)
Lists Async Port, Idle Timer
Ctrl