Cabletron Systems CSMIM-T1, Руководство администратора, Страница: 174 / 418

Chapter 13 Viewing and Changing Parameters
13-6 CSMIM/Micro-CS Management Application Guide
Viewing Parameter Values
Displaying Values
To check parameter values with the
Show
command:
1 Select the level of detail you need using the
Verbose Output
button.
When you select
Verbose Output,
the output box includes
parameter names, MIB definitions, default values, and current
values. If you do not select it, the output box includes only
parameter names and current values.
2 Select a port type and port number.
If you selected parameter groups that require port numbers,
you must use these fields. If your selections do not require
this information, you can skip this step.
3 Choose
.
Values appear in the output box for the parameters you selected.
The level of detail in the box depends on your use of the
Verbose
Output
button.
Changing Parameter Values
The
Set
command, like the
Show
command, displays parameter names and
values. In addition,
Set
allows you to change parameter values. This section
discusses the
Set
window’s display options, explains the window’s format,
and gives instructions for changing parameter values. It includes:
❑
Displaying the Set Window
❑
Understanding the Set Window Format
❑
Changing Parameter Values
Displaying the Set Window
Displaying the Window
The
Set
command originates in the main window. To display the
Set
window:
1 Create an Annex list.
For details about creating lists, refer to .
Apply