Bosch Rexroth VFC 3210, Руководство по эксплуатации, Страница: 108 / 282

Used for the 3-wire control mode, see chapter 12.6.3 "2-wire / 3-wire Control
(Forward / stop, reverse / stop)" on page 123 .
●
26: Simple PLC stop; 27: Simple PLC pause
Used for the simple PLC to stop and pause a PLC cycle, see chapter 12.8.4
"Stop and Pause Simple PLC Control" on page 136 .
●
30: Second frequency setting source activation
Used for switching to the second frequency setting source, see
chapter "Fre-
quency setting source switching" on page 91 .
●
31: Second run command source activation
Used for switching to the second run command source, see
chapter "Switch
between first and second run command source" on page 108 .
●
32: Error signal N.O. contact input
●
33: Error signal N.C. contact input
Used for receive error signal from external sources, see chapter 12.10.2 "Reac-
tion to External Error Signals" on page 155 .
●
34: Error reset input
Used for error reset operation, see
chapter 13.5 "Error Handling" on page
184 .
●
35: Forward running (FWD); 36: Reverse running (REV)
Used for Run / Stop command control, see chapter 12.5 "Run- / Stop- / Direc-
tion Command Source" on page 107 .
●
37: Forward jog; 38: Reverse jog
See chapter 12.6.2 "Jog Function" on page 121 .
●
39: Counter input; 40: Counter reset
See chapter 12.7.1 "Counter Function" on page 127 .
●
41: PID deactivation
See
chapter 12.9 "PID Control" on page 139 .
●
46: User parameter set selection
●
48: Motor overheating error N.O. contact input
●
49: Motor overheating error N.C. contact input
●
50: Motor overheating warning N.O. contact input
●
51: Motor overheating warning N.C. contact input
Bosch Rexroth AG
Functions and Parameters VFC 3210
80/253
DOK-RCON04-VFC3210****-IT01-EN-P