Bosch Rexroth VFC 3210, Руководство по эксплуатации, Страница: 103 / 282

●
If a parameter in group '-PF-' is changed back to its default set-
ting, that parameter is still visible in group '-PF-'. It is invisible af-
ter exit from and re-access to group '-PF-'.
●
Parameters b0.10, b0.20, b0.21, C1.01, C0.53, E9.05…E9.07,
E9.10…E9.15 are excluded for this function.
●
Accessing to group '-PF-' if no parameter has been changed, the
warning message 'noCP' will be displayed for 1.5 s, and then '-PF-'
will be displayed again.
12.1.2 Parameter Initialization
This function is used to restore parameter settings to factory defaults when a
frequency converter fails to drive the motor due to wrong parameter settings.
Be sure that the parameter settings match with the motor data and the actual
applications after factory defaults restore. Adjust the parameter default settings
if necessary.
Code Name Setting range Default Min. Attri.
b0.10 Parameter initialization 0...2 0 – Stop
●
0: Inactive
This parameter will be reset to '0: Inactive' automatically after parameter initi-
alization.
●
1: Restore to default settings
All parameters are restored to factory default settings except for:
– C0.51 (Fan total running time)
– E9.05…E9.07, E9.10…E9.15, E9.97...E9.99 (Error records)
– d0.23 (Power stage running time)
●
2: Clear error record
Parameter E9.05… E9.07, E9.10…E9.15, E9.97...E9.99 (Error records) will be
cleared.
VFC 3210 Bosch Rexroth AG
Functions and Parameters
DOK-RCON04-VFC3210****-IT01-EN-P
75/253