Bosch Rexroth VFC 3210, Руководство по эксплуатации, Страница: 137 / 282

12.5.3 Direction Control
Direction control via operation panel
The actual direction is controlled by the configuration of parameter [U0.00] 'Di-
rection control by panel' and [E0.17] 'Direction control'.
Code Name Setting range Default Min. Attri.
U0.00 Direction control by panel
0: Forward
1: Reverse
0 – Run
E0.17 Direction control
0: Forward / Reverse
1: Forward only
2: Reverse only
3: Swap default direction
0 – Stop
[E0.17] setting [U0.00] setting Actual direction
0 Forward / Reverse
Forward Forward
Reverse Reverse
1 Forward only
Forward Forward
Reverse Converter stop and show error code 'dir1'
2 Reverse only
Forward Converter stop and show error code 'dir2'
Reverse Reverse
3 Swap default direction
Forward Reverse
Reverse Forward
Tab. 12-5: Direction configuration
For error codes 'dir1', 'dir2' concerning direction control, see chap-
ter 13.4 "Error Code" on page 176 .
Reverse running frequency
Code Name Setting range Default Min. Attri.
E0.11 Reverse running frequency 0.00...[E0.09] Hz 0.00 0.01 Stop
When the converter is running in reverse direction, the setting frequency will be
defined by E0.11.
This reverse running frequency is ONLY active when converter is NOT
running in multi-speed, simple PLC, or PID control mode.
VFC 3210 Bosch Rexroth AG
Functions and Parameters
DOK-RCON04-VFC3210****-IT01-EN-P
109/253