Bosch Rexroth VFC 3210, Руководство по эксплуатации, Страница: 233 / 282

bit HEX Description
bit 15
.
.
.
bit 0
2A E-St, terminal error signal
2B FFE-, firmware version mismatch
2C rS-, modbus communication error
2D E.Par, parameter settings invalid
2E U.Par, unknown parameter restore error
30 idA-, internal communication error
31 idP-, internal parameter error
32 IDE-, converter internal error
33 OCd-, extension card internal error
34 Occ, extension card PDOs configuration error
35 Fdi-, no valid process data
36 PcE-, remote control communication error
37 PbrE, parameter backup / restore error
38 PrEF, parameter restore error after firmware update
3C ASF-, application firmware error
3D APE1, application error 1
3E APE2, application error 2
3F APE3, application error 3
40 APE4, application error 4
41 APE5, application error 5
Tab. 14-27: Fault status register (0x7FB0)
Communication frequency setting register (0x7F01)
The address of frequency setting register for communication control is 0x7F01.
This register is for read and write. When 'First frequency setting source' [E0.00]
= '20: Communication', the frequency converter can be set with writing data to
this address.
VFC 3210 Bosch Rexroth AG
Communication
DOK-RCON04-VFC3210****-IT01-EN-P
205/253