Beckman Coulter CEQ 8000, Руководство пользователя, Страница: 382 / 382

Diagnostics
368 CEQ™ 8000 Genetic Analysis System
Monitoring the Baseline
You must perform the optical alignment procedures prior to monitor-
ing the baseline (“Performing an Optical Alignment’ on page 333).
To monitor the baseline, perform the following steps.
1. Select
Run | Monitor Baseline
from the Run Module main menu.
2. From the
Monitor Baseline
dialog box:
a. Select the
Enable Monitor Baseline
check box.
b. Select the
Autosave
check box (to save monitor baseline data).
c. Enter a name in the
Name
field.
d. Select a
Project
from the drop-down menu and then select
OK
.
5. To view the baseline trace:
a. Access the desired Analysis module.
b. Select
File | Open
from the menu.
c. Click on the
Sample Data
tab and select the desired baseline data (the
baseline data is displayed).