manualshive.com logo in svg

Baxi PBS-i WH2 Series, Руководство пользователя, Страница: 9 / 180

Поделиться
Скачать
Baxi PBS-i WH2 Series Скачать руководство пользователя страница 9

2  Symbols used

2.1 

Symbols used in the manual

This manual uses various danger levels to draw attention to special 

instructions. We do this to improve user safety, to prevent problems and to 

guarantee correct operation of the appliance.

Danger

Risk of dangerous situations that may result in serious personal 

injury.

Danger of electric shock

Risk of electric shock.

Warning

Risk of dangerous situations that may result in minor personal 

injury.

Caution

Risk of material damage.

Important

Please note: important information.

See

Reference to other manuals or pages in this manual.

2.2 

Symbols used on the appliance

1 Alternating current

2 Protective earthing

3 Before installing and commissioning the appliance, carefully read 

the instruction manuals provided.

4 Dispose of used products through an appropriate recovery and 

recycling structure.

5 Caution: danger of electric shock, live parts. Disconnect the mains 

power prior to carrying out any work.

2.3 

Symbols used on the data plate

1 Information concerning the heat pump: refrigerant type, maximum 

allowable operating pressure

2 The symbol indicates compatibility with the Mago connected 

thermostat.

3 Information on the electrical back-up: power supply and maximum 

output (only for versions with electrical back-up)

4 Before installing and commissioning the appliance, carefully read 

the instruction manuals provided

5 Dispose of used products in an appropriate recovery and recycling 

structure

Fig.1

1

2

MW-2000068-1

1

2

3

4

5

Fig.2

MW-1001191-2

1

2

3

4

5

2  Symbols used

7706698 - v04 - 17102018

AWHP-2 PBS-i

9

Содержание PBS-i WH2 Series





















































































































































































Отзывы:

Нет отзывов