Baxi PBS-i WH2 Series, Руководство пользователя, Страница: 118 / 180

Parameter Description Factory setting
CIRCA
Factory setting
CIRCB
CP470 Setting of the screed drying program of the zone
0 = deactivated
Can be set from 1 to 30 days
0 0
CP480 Setting of the start temperature of the screed drying programm
of the zone
Can be set from 20 °C to 50 °C
20 20
CP490 Setting of the stop temperature of the screed drying programm
of the zone
Can be set from 20 to 50 °C
20 20
CP500 Enable/Disable Flow temperature sensor of the zone
0 =Off
1 =On
Do not modify this setting
not available 0
CP640 Opentherm Logic level contact of the zone
0 = contact open for heating demand
1 = contact closed for heating demand
1 1
CP650 Desired reduced room temperature setpoint in cooling mode
per zone
Can be set from 20 °C to 30 °C
29 29
CP690 Reversed Opentherm contact in cooling mode for heat demand
per zone
0 =No
1 =Yes
0 0
CP750 Maximal Zone Preheat time
Can be set from 0 Min to 240 Min
0 0
CP780 Selection of the control strategy for the zone
0 = Extra Slow
1 = Slowest
2 = Slower
3 = Normal
4 = Faster
5 = Fastest
0 0
ADV Advanced parametersADV CIRCA sub-menu:
not available
CIRCB sub-menu:
available
9.2.2 Installer \CIRCA and CIRCB\ADV menu
Tab.46
ADV Description of the ADV advanced parameters Factory setting
CIRCB
CP330 The time needed by the valve to be fully opened
Can be set from 0 Sec to 240 Sec
Do not modify this setting
60
CP520 Power setpoint per zone
Can be set from 0 % to 100 %
Do not modify this setting
100
CP530 Pulse Width Modulation pump speed per zone
Can be set from 0 % to 100 %
Do not modify this setting
20
9 Settings
70 AWHP-2 PBS-i 7706696 - v04 - 11102018