manualshive.com logo in svg

Baxi PBS-i WH2 Series, Руководство пользователя, Страница: 143 / 180

Поделиться
Скачать
Baxi PBS-i WH2 Series Скачать руководство пользователя страница 143

Status Appliance: AM012 parameter

Appliance sub status: AM014 parameter

12

Load test CH max

30= normal operation. The compressor or the back-ups are running.

31= internal set point limited

If the heating set point on the heat pump differs from the system set point.

60= pump post-operation

Heat pump and back-up shut-down, system pump post-operation.

65= compressor bypass and back-ups running

66= the temperature exceeds the compressor's maximum operating tempera­

ture

The compressor has stopped. The back-ups are operating.

67= the outside temperature is lower than the compressor's maximum operat­

ing temperature

The compressor has stopped. The back-ups are operating.

68= the hybrid function requests compressor shut-down

The compressor has stopped. The back-ups are operating.

69= defrosting running

The compressor is running.

70= defrosting conditions not provided

The compressor has stopped. The back-ups are operating.

71= defrosting running.

The compressor and the back-ups are running.

9  Settings

7706696 - v04 - 11102018

AWHP-2 PBS-i

95

Содержание PBS-i WH2 Series





















































































































































































Отзывы:

Нет отзывов