AWS Storage Gateway Скачать руководство пользователя страница 432

Страница: 432 / 438

AWS Storage Gateway User Guide

Earlier Updates

Change

Description

Date Changed

New Region

Support for storage

up to 512 TiB in size

for stored volumes

Other gateway

updates and

enhancements to

the AWS Storage

Gateway local

console

Tape gateway is now available in the Asia Paciﬁc (Seoul)

Region. For more information, see

AWS Regions (p. 10)

For stored volumes, you can now create up to 32 storage

volumes up to 16 TiB in size each, for a maximum of

512 TiB of storage. For more information, see

Stored

Volumes Architecture (p. 5)

and

AWS Storage Gateway

Limits (p. 395)

Total size of all tapes in a virtual tape library is increased

to 1 PiB. For more information, see

AWS Storage Gateway

Limits (p. 395)

You can now set the password for your VM local console

on the AWS Storage Gateway Console. For information,

see

Setting the Local Console Password from the Storage

Gateway Console (p. 253)

March 21, 2016

Compatibility

with for Dell EMC

NetWorker 8.x

Tape gateway is now compatible with Dell EMC

NetWorker 8.x. You can now use Dell EMC NetWorker to

back up your data to Amazon S3 and archive directly to

oﬄine storage (GLACIER or DEEP_ARCHIVE). For more

information, see

Testing Your Setup by Using Dell EMC

NetWorker (p. 95)

February 29, 2016

Support for VMware

ESXi Hypervisor

version 6.0 and Red

Hat Enterprise Linux

7 iSCSI initiator

Content restructure

AWS Storage Gateway now supports the VMware ESXi

Hypervisor version 6.0 and the Red Hat Enterprise

Linux 7 iSCSI initiator. For more information, see

Supported Hypervisors and Host Requirements (p. 20)

and

Supported iSCSI Initiators (p. 22)

This release includes this improvement: The

documentation now includes a Managing Your Activated

Gateway section that combines management tasks

that are common to all gateway solutions. Following,

you can ﬁnd instructions on how you can manage your

gateway after you have deployed and activated it. For

more information, see

Managing Your Gateway (p. 144)

October 20, 2015

API Version 2013-06-30

425

Содержание Storage Gateway























































































































































































































































































































































































































































Результаты поиска

Содержание Storage Gateway

Отзывы:

Похожие инструкции для Storage Gateway

Бренды по названию

Популярные бренды

AWS Storage Gateway, Руководство пользователя

Результаты поиска

Содержание Storage Gateway

Отзывы:

Похожие инструкции для Storage Gateway

Бренды по названию

Популярные бренды