AWS Storage Gateway Скачать руководство пользователя

Страница: 365 / 438

AWS Storage Gateway User Guide

Working with VTL Devices

with tape gateways. This table includes the medium changer type recommended for each backup

application.

Backup Application

Medium Changer Type

Arcserve Backup

AWS-Gateway-VTL

Bacula Enterprise V10.x

AWS-Gateway-VTL

STK-L700

Commvault V11

STK-L700

Dell EMC NetWorker V8.x or V9.x

AWS-Gateway-VTL

IBM Spectrum Protect v7.x

IBM-03584L32-0402

Micro Focus (HPE) Data Protector 9.x

AWS-Gateway-VTL

Microsoft System Center 2012 R2 or 2016 Data

Protection Manager

STK-L700

NovaStor DataCenter/Network 6.4 or 7.1

STK-L700

Quest NetVault Backup 10.0 or 11.x or 12.x

STK-L700

Veeam Backup & Replication V7 or V8

STK-L700

Veeam Backup & Replication V9 Update 2 or

later

AWS-Gateway-VTL

Veritas Backup Exec 2014 or 15 or 16 or 20.x

AWS-Gateway-VTL

Veritas Backup Exec 2012

Note

Veritas has ended support for Backup

Exec 2012. For more information, see

End of Support for Prior Backup Exec

Versions

STK-L700

Veritas NetBackup Version 7.x or 8.x

AWS-Gateway-VTL

Important

We highly recommend that you choose the medium changer that's listed for your backup

application. Other medium changers might not function properly. You can choose a diﬀerent

medium changer after the gateway is activated. For more information, see

Selecting a

Medium Changer After Gateway Activation (p. 358)

For tape drives, Storage Gateway works with the following:

• IBM-ULT3580-TD5—This device emulation is provided with the gateway.

Selecting a Medium Changer After Gateway Activation

After your gateway is activated, you can choose to select a diﬀerent medium changer type.

Important

If your tape gateway uses the Symantec Backup Exec 2014 or NetBackup 7.x backup software,

you must select the AWS-Gateway-VTL device type. For more information on how to change the

API Version 2013-06-30

358

Содержание Storage Gateway























































































































































































































































































































































































































































Результаты поиска

Содержание Storage Gateway

Отзывы:

Похожие инструкции для Storage Gateway

Бренды по названию

Популярные бренды

AWS Storage Gateway, Руководство пользователя

Результаты поиска

Содержание Storage Gateway

Отзывы:

Похожие инструкции для Storage Gateway

Бренды по названию

Популярные бренды