manualshive.com logo in svg

Avocent DSView, Инструкция по установке и эксплуатации

Поделиться
Скачать
Avocent DSView Скачать руководство пользователя страница 246

228

        DSView Installer/User Guide

Displaying the BMC system log and log events

The System Event Log window displays the BMC events which have occurred during the DSView 
software session.

If a user or a user group to which to a user belongs has Configure Unit Settings access rights for the 
IPMI 1.5 target device, the Clear Log button will appear in the System Event Log window. 
Clicking the 

Clear Log

 button clears all entries from the system event log on the IPMI 1.5 target 

device and writes the name of the IPMI 1.5 target device and the user who cleared the system event 
log to the audit log. See 

Changing Unit Access Rights

 on page 91 for more information on setting 

access rights and 

About Audit Logs

 on page 263 for more information.

The generated events will vary by BMC, motherboard and chassis implementation.

To display detailed information about a specific BMC event, click on the event name. The Event 
Entry Details window will open.

The following information appears in the Event Entry Details window about the selected 
sensor event:

•

Sensor Name - Sensor name.

•

Timestamp - Time, in the target device time zone, at which the event occurred on the IPMI 1.5 
target device. 

If the BMC clock has not been synchronized with the PC clock, the timestamp may reflect the 
time relative to the startup of the host instead of the event occurrence.

•

ID - Unique system event log (SEL) identifier used for retrieving events.

•

Event Type - Event type.

•

Sensor Type - Sensor type.

•

Description - Description of the event.

Additional information provided by certain sensor events may also appear in the Event Entry 
Details window.

Customizing the System Event Log window

The Sensor Name and ID fields are always displayed in the System Event Log window.

By default, the Time, Description and Event Type fields display in the System Event Log window 
and may be removed using the Customize link:

The Sensor Type field is not displayed by default, but may be displayed using the Customize link:

See 

Using the Customize link in windows

 on page 14 for more information.

To display the BMC system log and log events:

1.

From a Target Devices, Units in Site, Units in Custom Field, Topology or Recently Accessed 
Units window, click on the name of a supported IPMI 1.5 target device. The side navigation 
bar will contain the name of the target device at the top and 

Overview

 will automatically be 

selected. The Unit Overview window will open.

Содержание DSView







































































































































































































































































































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды