manualshive.com logo in svg

Avocent DSView, Инструкция по установке и эксплуатации

Поделиться
Скачать
Avocent DSView Скачать руководство пользователя страница 2

LIMITED WARRANTY 

Avocent Corporation warrants to the original retail purchaser that this product is and will be free from defects 
in materials and workmanship for a period of 24 months from the date of purchase.
    
Additionally, all Avocent products carry an unconditional thirty-day satisfaction guarantee. If, for any reason, 
you are dissatisfi ed with the performance of this product, you may return it to the point of purchase for a refund 
of the purchase price (excluding shipping charges). This guarantee does not apply to special order products, and 
may not be available through all resellers. During the warranty period, purchaser must promptly call Avocent 
for a RETURN MATERIALS AUTHORIZATION (RMA) number. Make sure that the RMA number appears on 
the packing slip, proof of purchase, AND ON THE OUTSIDE OF EACH SHIPPING CARTON. Unauthorized 
returns or collect shipments will be refused.

Ship prepaid to:                       Avocent Corporation 
                                                  4991 Corporate Drive
                                                  Huntsville, AL 35805 U.S.A.  
                                                  Telephone: (256) 430-4000 
    
The above limited warranty is voided by occurrence of any of the following events, upon which the product is 
provided as is, with all faults, and with all disclaimers of warranty identifi ed below:

1.      If defect or malfunction was caused by abuse, mishandling, unauthorized repair, or use other 
        than intended.  
2.     If unauthorized modifi cations were made to product.  
3.     If unreported damages occurred in any shipment of the product.                      
4.     If damages were due to or caused by equipment or software not provided by Avocent.
5.     If the product is used with non-grounded or incorrectly polarized AC power.
6.     If the product is used in contradiction to any instruction provided by any User Guide or Instruction Sheet 

provided to you or with the product.

7.      If the product is damaged due to power surges, water exposure or act of God including lightning.

EXCEPT AS SPECIFICALLY PROVIDED ABOVE AND TO THE MAXIMUM EXTENT ALLOWED BY LAW, 
AVOCENT CORPORATION DISCLAIMS ALL WARRANTIES AND CONDITIONS WHETHER EXPRESS, 
IMPLIED, OR STATUTORY AS TO ANY MATTER WHATSOEVER INCLUDING, WITHOUT LIMITATION, 
TITLE,  NON-INFRINGEMENT, CONDITION, MERCHANTABILITY OR FITNESS FOR ANY PARTICULAR 
OR INTENDED PURPOSE.

EXCEPT AS EXPRESSLY PROVIDED ABOVE AND TO THE MAXIMUM EXTENT ALLOWED BY LAW, 
AVOCENT CORPORATION SHALL NOT BE LIABLE FOR ANY SPECIAL, INDIRECT OR CONSEQUENTIAL 
DAMAGES (INCLUDING WITHOUT LIMITATION, LOSS OF PROFIT, LOSS OF BUSINESS, LOSS OF 
INFORMATION, FINANCIAL LOSS, PERSONAL INJURY, LOSS OF PRIVACY OR NEGLIGENCE) WHICH MAY 
BE  CAUSED  BY  OR RELATED TO, DIRECTLY OR INDIRECTLY, THE USE OF A PRODUCT OR SERVICE, 
THE INABILITY TO USE A PRODUCT OR SERVICE, INADEQUACY OF A PRODUCT OR SERVICE FOR 
ANY PURPOSE OR USE THEREOF OR BY ANY DEFECT OR DEFICIENCY THEREIN EVEN IF AVOCENT 
CORPORATION OR AN AUTHORIZED AVOCENT DEALER HAS BEEN ADVISED OF THE POSSIBILITY 
OF SUCH DAMAGES OR LOSSES.

©2005 Avocent Corporation. All rights reserved.

INSTRUCTIONS

This symbol is intended to alert the user to the presence of important operating and 

maintenance (servicing) instructions in the literature accompanying the appliance. 

DANGEROUS VOLTAGE

This symbol is intended to alert the user to the presence of uninsulated dangerous 

voltage within the product’s enclosure that may be of sufficient magnitude to 

constitute a risk of electric shock to persons. 

POWER ON

This symbol indicates the principal on/off switch is in the on position. 

POWER OFF

This symbol indicates the principal on/off switch is in the off position. 

PROTECTIVE GROUNDING TERMINAL

This symbol indicates a terminal which must be connected to earth ground prior to 

making any other connections to the equipment. 

Содержание DSView







































































































































































































































































































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды