Avocent DSView, Инструкция по установке и эксплуатации

Страница: 243 / 358

Chapter 8: Working with IPMI 1.5 Target Devices
225
To display IPMI 1.5 target device sensor information:
1. From a target devices, Units in Site, Units in Custom Field, Topology or Recently Accessed
Units window, click on the name of a supported IPMI 1.5 target device. The side navigation
bar will contain the name of the target device at the top and
Overview will automatically be
selected. The Unit Overview window will open.
2. From the side navigation bar, click IPMI . Device Info will automatically be selected and the
IPMI Device Information window will open.
3. From the side navigation bar, click Discrete Sensors . The IPMI Discrete Sensors window
will appear.
4. Click on the name of a sensor. The IPMI Discrete Sensor Details window will open.
5. Click Close when you are finished to return to the IPMI Discrete Sensors window.
6. Click Close when you are finished to return to the target devices, Units in Site, Units in
Custom Field, Topology or Recently Accessed Units window.
Displaying IPMI 1.5 target device numeric sensor information
The IPMI Numeric Sensors window displays information about the numeric sensors managed by
the BMCs in the IPMI 1.5 target device.
The type and number of sensors displayed will vary by BMC, motherboard and
chassis implementation.
To display detailed information about a specific sensor managed by a BMC, click on its name. The
IPMI Numeric Sensor Details window will open.
The following information appears in the IPMI Numeric Sensor Details window about the
selected sensor:
• Name - Numeric sensor name.
• Sensor Type - Numeric sensor type. A gauge icon representing the numeric sensor type will
appear to the left of the name.
• Units - Numeric sensor type units (volts, RPM and so on).
• Current Reading - Numeric sensor current reading (5.006V, 35.0 ° C and so on).
• Status - Numeric sensor status. Possible status values are: OK, Non-Critical (Low), Critical
(Low), Non-Recoverable (Low), Non-Critical (High), Critical (High) and Non-
Recoverable (High)
The following information may appear for a selected sensor in the IPMI Numeric Sensors window,
depending on whether the information is applicable to the sensor type:
• Lower Critical - Lower critical numeric sensor value.
• Lower Non-Critical - Lower non-critical numeric sensor value.
• Lower Non-Recoverable - Lower non-recoverable numeric sensor value.
• Negative Hysteresis - Negative hysteresis numeric sensor value.
• Positive Hysteresis - Positive hysteresis numeric sensor value.