Avocent DSView, Инструкция по установке и эксплуатации

Страница: 139 / 358

Chapter 4: Managing Units
121
2. From the side navigation bar, click Connections .
If you selected a target device, the Target Device Connections window will open, including all
connections to the target device.
-or-
If you selected a managed appliance, the Appliance Connections window will open, including
all connections to the DS1800 digital switch, DSI5100, CPS or CCM appliance or DSR switch.
To rename a managed appliance connection:
1. From the Appliance Connections window, click on a connection. The Appliance Connections -
Rename window will open.
2. Type in new name for one or more items in the connection chain.
3. Click Save.
4. Click Close . The Appliance Connections window will open, including your changes.
Adding target device connections
To add target devices:
1. Click Add in the Target Device Connections window to display the Add Target Device
Connection Wizard.
2. Click Next .
3. The Select Connection Type window will open.
a. Select KVM to create a connection to a DS1800 digital switch or DSR switch port using a
DSRIQ module.
-or-
Select Serial to create a serial port connection to a CPS or CCM appliance.
-or-
Select Power to create a connection to an SPC device outlet.
-or-
Select IPMI to create a connection to a DSI5100 appliance. An IPMI connection may only
be made to IPMI 1.5 compatible target devices.
b. Click Next .
4. The Select Appliance with Available Ports window will open. Select a managed appliance
from the drop-down menu, then click
Next .
5. The Select Available Connection window will open. Select a connection from the drop-down
menu, then click
Next .
6. The Completed Successful window will open. Click Finish . The Target Device Connections
window will open, including the new connection to the target device.