Avocent DSView, Инструкция по установке и эксплуатации

Страница: 32 / 358

14
DSView Installer/User Guide
Saving information in a window
When you change information in a DSView Explorer window, you must click Save in order to
apply the changes. By default, a message box will appear if you click Close or try to exit the
window by clicking a link in the top bar, top navigation bar or side navigation bar without first
clicking
Save .
Clicking OK in the message box will exit the current window without saving the changes. If you
wish to save the changes you have made, click Cancel in the message box and then click Save in
the window.
You may choose whether or not to be reminded to save changes made to windows before exiting
them. See
Changing user options on page 18 for more information.
Using the Customize link in windows
DSView Explorer windows that contain a Customize link allow you to change the
following information:
• Which columns of information are displayed
• The number of items displayed per page in the window
• Showing units that have been hidden (Unit Views windows)
The items available for customizing and methods for changing them will vary, depending on the
window you choose to customize. Although the items that appear in windows may vary (depending
on the window you customize), the items that do appear are modified identically regardless of the
window from which you clicked the
Customize link.
To customize a window using the Customize link:
1. In a window containing a Customize link in the upper right corner, click the link. A View
Customization window will open.
2. Customize the window.
To add a field to the window display:
a. Select the field in the Available Fields list. Multiple fields may be selected by pressing
Ctrl
or
Shift
while clicking on the field names.
b. Click Add . The field(s) will be moved to the Fields to Show list.
To change the order that fields display from left to right in the window:
a. Select a field in the Fields to Show list.
b. Use the up or down arrow to change its order in the list. Multiple fields may be selected by
pressing
Ctrl
or
Shift
while clicking on the field names.
To remove a field from displaying in the window:
a. Select the field from the Fields to Show list. Multiple fields may be selected by pressing
Ctrl
or
Shift
while clicking on the field names.
b. Click Remove . The field(s) will be moved to the Available Fields list.