Avaya P332G-ML, Руководство пользователя

Страница: 96 / 254

Chapter 6 CLI – Layer 2
78 Avaya P334T-ML User’s Guide
show autopartition
Use the
show autopartition
command to display the automatic partition status
for 10/100 ports witnhin a module.
Note:
Autopartition for the P330-ML switches will always have the value
disabled
. This command is used to display the autopartition status for the other
P330 switches in the stack.
The syntax for this command is:
show autopartition [module]
Example:
P330-N> show autopartition 1
Mod Mode
--- -----------
1 Enable
Designated
Root Cost Total path cost to reach the root
Designated
Root Port Port through which the root bridge can be reached (shown only
on nonroot bridges)
Root Max Age Amount of time a BPDU packet should be considered valid
Hello Time Number of times the root bridge sends BPDUs
Bridge ID
MAC ADDR Bridge MAC address used in the sent BPDUs
Bridge ID
Priority Bridge priority
Port Port number
State Spanning-tree port state (disabled, inactive, not-connected,
blocking, listening, learning, forwarding, bridging, or type-
pvid-inconsistent)
Cost Cost associated with the port
Priority Priority associated with the port