Avaya P332G-ML, Руководство пользователя

Страница: 137 / 254

Chapter 6 CLI – Layer 2
Avaya P334T-ML User’s Guidee 119
Note: If this command is to be implemented on a switch other than the stack master,
a session should be opened to the relevant switch.
The syntax for this command is:
set boot bank <value>
Output Example:
P330-1(super)# set boot bank bank-a
Boot bank set to bank-a
set intermodule port redundancy
Use the
set intermodule port redundancy
command to define or delete the
stack’s unique intermodule redundancy scheme. The defined scheme can be cleared
using the
set intermodule port redundancy off command
.
The syntax for this command is:
set intermodule port redundancy <module/prim-port> <module/
second-port> {on [<name>]}
Output Example:
P330-N> set intermodule port redundancy 1/7 2/12 on backbone
backbone: port 2/12 is intermodule redundant to port 1/7
Note: You must disable Spanning Tree before you can enable redundancy.
value {bank-a | bank-b}
module/prim-port The primary port number
module/second-port The secondary port number
on Set the intermodule redundancy
name The name of the fast redundancy (default is 'fast')