Avaya P332G-ML, Руководство пользователя

Страница: 139 / 254

Chapter 6 CLI – Layer 2
Avaya P334T-ML User’s Guidee 121
The syntax for this command is:
set port spantree {enable|disable} [module/port]
Output Example:
Enable the spanning tree mode for port 2 on module 3.
P330-N# set port spantree enable 3/2
set port spantree priority
Use the
set port spantree priority
command to set the priority level of a
port. This value defines the priority of a port to be blocked in case two ports with
the same costs cause a loop.
The syntax for this command is:
set port spantree priority [module/port] [value]
set port spantree cost
Use the
set port spantree cost
command to set the cost of a port. This value
defines which port will be allowed to forward traffic if two ports with different costs
cause a loop.
The syntax for this command is:
set port spantree cost [module/port] [value]
enable|disable Enables or disables the spanning tree mode for the
specified ports.
module/port The switch/port number. A range of ports can be specified
as well.
module/port The switch number/the port number.
value Number representing the priority of the port. The priority
level is from 0 to 255, with 0 indicating high priority and
255 indicating low priority. A port with a lower priority
will be blocked.
module/port The switch number/the port number.
value Number representing the cost. The cost level is set from 1
to 65535. A lower cost (lower value) specifies precedence
of a port to forward traffic.