Avaya P332G-ML, Руководство пользователя

Страница: 37 / 254

P334T-ML
User’s Guide 19
Chapter 2
Avaya P334T-ML Front and Rear Panels
Avaya P334T-ML Front Panel
The P334T-ML front panel contains LEDs, controls, and connectors. The status LEDs
and control buttons provide at-a-glance information.
The front panel LEDs consist of Port LEDs and Function LEDs. The Port LEDs
display information for each port according to the illuminated function LED. The
function is selected by pressing the left or right button until the desired parameter
LED is illuminated. Each Function is displayed first for ports 1-24. Pressing the
same button a second time displays the function for ports 25-48 (see Figure 2.3).
Pressing the same button a third time will move to the next function. When the 25-
48 LED is OFF, ports 1-24 are displayed, and when the 25-48 LED is ON, ports 25-48
are displayed. The information for the SFP ports (51, 52) is displayed regardless of
the status of the 25-48 LED.
For example, if the COL LED is illuminated, and the 25-48 LED is off, then all Port
LEDs show the collision status of ports 1-24. If you wish to select the LAG function
for the same ports, then press the right button until the LAG Function LED is lit and
the 25-48 LED is OFF. If you then wish to select Rx for ports 25-48, press the left
button several times until both the Rx function LED and the 25-48 LED light.
The P334T-ML front panel shown below includes LEDs, buttons, SFP GBIC
transceiver housings 10/100 Base-T ports and the RJ-45 console connector (refer to
Figure 2.1 and Figure 2.2). The LEDs are described in Table 2.1.
Note: The 10/100BaseT ports of the P334T-ML are numbered from 1-48. The two
SFP Gigabit Ethernet ports are numbered 51,52. Port LED numbers 49-50 are
reserved.
Figure 2.1 P334T-ML Front Panel