Avaya Media Gateway G350, Руководство по обслуживанию

Страница: 46 / 332

G350 component maintenance
IP telephones
46 Maintenance of the Avaya G350 Media Gateway
June 2004
Reset and power cycle
Reset your IP Telephone when other Troubleshooting suggestions do not correct the problem. Use a
Power Cycle with the approval of your System Administrator only when a reset does not resolve the
problem.
Reset your phone
This basic reset procedure should resolve most problems.
To reset your phone:
1
Press Hold.
2
Using the dial pad, press the following keys in sequence: 73738#
The display shows the message “Reset values? * = no # = yes.”
Phone does not ring If you have a 4612 or 4624 IP Telephone, use the
Menu to access the RngOf (Ringer Off) feature; if a
carat (downward triangle) appears above that feature,
your phone is set to not ring. To correct, press the
softkey below RngOf; when the carat does not
display, your ringer is active.
If "Ringer Off" is programmed on a Line/Feature
button, that button's indicator light will appear as
steady green; reactivate the ringer by pressing that
Line/Feature button again.
Set your ringer volume to a higher level using the
Up/Down Volume keys.
From another phone, place a call to your extension to
test the above suggested solutions.
Speakerphone does not operate Ask your System Administrator if your speakerphone
has been disabled.
A feature does not work as indicated in
the User Guide Verify the procedure and retry. For certain features,
you must lift the handset first or place the phone off-
hook.
See your Telephone System Administrator if the
above action does not produce the desired result; your
telephone system may have been specially
programmed for certain features applicable only to
your installation.
All other IP Phone problems Contact your Telephone System Administrator.
Table 17: IP Phone Problems and Solutions 3 of 3
Problem/Symptom Suggested Solution
3 of 3