Avaya Media Gateway G350, Руководство по обслуживанию

Страница: 253 / 332

Access and login procedures
Connection methods
Maintenance of the Avaya G350 Media Gateway 253
June 2004
e
If Use a proxy server for your LAN is selected, you can:
— Deselect it and click
OK
to exit;
— Or, you can leave it selected and configure your browser to bypass the proxy server
whenever you are connected to the S8300 services port as follows:
•
Click
Advanced.
•
Type 192.11.13.6 in the Exceptions box. If there are other entries in this box, add
to the list of entries and separate entries with a “;”.
•
Click OK to exit.
For Netscape
a
Select Edit > Preferences .
b
Under Category, click
Advanced
.
c
Click Proxies .
d
If
Direct connection to the Internet
is selected, no change is necessary; click
Cancel
to
exit.
e
If Direct connection to the Internet is not selected, you can:
— Select it and click
OK
to exit;
— Or, you can leave it unselected and configure your browser to bypass the proxy server
whenever you are connected to the S8300 services port as follows:
•
Select
Manual Proxy Configuration
and click
View.
•
Type 192.11.13.6 in the Exceptions box (or in the No Proxy for: box in later
versions of Netscape). If there are other entries in this box, add to the list of entries
and separate entries with a ";".
•
Click OK to exit.
Connection methods
Connect laptop to Services port of S8300
To connect your laptop directly to the S8300 Media Server:
1
Make sure your laptop meets the hardware and software requirements.
2
Plug an Ethernet crossover cable (MDI to MDI-X) into the 10/100 BaseT Ethernet network
interface card (NIC) on your laptop.
— Crossover cables of various lengths are commercially available.
— See Table 138, Crossover cable pinout chart, on page 254 for pinout connections if
needed. Crossover of the transmit and receive pairs (as shown) is required.