Avaya G450 Manager, Справочное руководство CLI

Страница: 385 / 1334

Ethernet port configuration
Issue 1 January 2008 385
User Level
read-write
Context
general
Example
To specify that the connection type of port 6/5 is automatically detected:
G450-001(super)# set port point-to-point admin status 6/5 auto
Related Commands
set port auto-negotiation-flowcontrol-advertisement , set port enable | disable , set port duplex ,
set port edge admin state , set port enable | disable , set port flowcontrol , set port level , set port
name , set port negotiation , set port speed , show port
auto-negotiation-flowcontrol-advertisement , show port edge state , show port flowcontrol
set port speed
Use the
set port speed
command to configure the speed of a port or range of ports.
In auto-negotiation mode, the port’s speed is determined by auto-negotiation. An error message
is generated if you try to set the speed when auto-negotiation is enabled
Syntax
set port speed module / port 10MB|100MB|1GB
Parameters
Parameter Description Possible
Values Default
Value
module
Number of the module
port
Number of the port on the module.
You can also specify a range of ports
separated by a dash, for example, 10/5-6 for
both ETH LAN ports 5-6 on the front panel.
10MB
Keyword that sets the specified port to a
speed of 10 Mbps