Avaya G450 Manager, Справочное руководство CLI

Страница: 933 / 1334

SLS survivability
Issue 1 January 2008 933
Example
To set the interface to agree with A-law companding for DS1:
G450-001 (sls-ds1-<port address>)# set interface-companding alaw
to set the interface to agree with A-law companding for BRI:
G450-001 (sls-bri-<port address>)# set interface-companding alaw
Related DS1 commands
clear ds1 , set bearer-capability , set bit-rate , set channel-numbering , set connect , set
country-protocol , set interface , set long-timer , set name , set protocol-version , set side , set
signaling-mode , set sls , show (ds1) , show ds1 , show sls , sls
Related BRI commands
bri , clear bri , set bearer-capability , set country-protocol , set directory-number-a , set
directory-number-b , set endpoint-init , set interface , set layer1-stable , set name , set side , set
spid-a , set spid-b , set sls , set tei-assignment , show bri , show (bri) , show sls , sls
set layer1-stable
Use the
set layer1-stable
command to determine whether or not to keep the physical
layer active (stable) between calls in SLS. Some European countries, France, for example,
require that the physical layer is deactivated when there is no active call.
Note:
Note:
This command is valid only for a BRI circuit employed with ISDN.
Syntax
set layer1-stable {yes | no}
Parameters
Parameter Description Possible
Values Default
Value
yes
Keyword specifying to keep the
physical layer active between calls.
This is the default.
no
Keyword specifying not to keep the
physical layer active between calls