Avaya G450 Manager, Справочное руководство CLI

Страница: 379 / 1334

Ethernet port configuration
Issue 1 January 2008 379
Example
To enable port 6/5:
G450-001# set port enable 6/5
Port 6/5 enabled.
Related Commands
set port auto-negotiation-flowcontrol-advertisement , set port enable | disable , set port duplex ,
set port edge admin state , set port flowcontrol , set port level , set port name , set port negotiation ,
set port point-to-point admin status , set port speed , show port
auto-negotiation-flowcontrol-advertisement , show port edge state , show port flowcontrol
set port flowcontrol
Use the
set port flowcontrol
command to set the send/receive mode for flow-control
frames (IEEE 802.3x or proprietary) for a full duplex port. Each direction (send or receive) can
be configured separately.
Syntax
set port flowcontrol {receive | send | all} module/port {off | on |
proprietary}
Parameters
Parameter Description Possible
Values Default
Value
receive
Keyword specifying whether the port can
receive its administrative status from a
remote device.
This option is only available for Gigabit
Ethernet modules with negotiation set to off.
send
Keyword specifying whether the local port
can send its administrative status to a
remote device.
This option is only available for Gigabit
Ethernet modules with negotiation set to off.
all
Keyword specifying whether the port can
send and receive (symmetric flow control).
Used with
on indicates that the local port
acts upon and sends flow control frames.
Used with
off indicates that the local port
discards and does not send flow control
frames.
module
Number of the module