Avaya G450 Manager, Справочное руководство CLI

Страница: 635 / 1334

Packet sniffing
Issue 1 January 2008 635
Example
To display all running protocol details:
G450-001(super)# show ip protocols
To display RIP details:
G450-001(super)# show ip protocols RIP
Routing Protocol is "rip"
Sending updates every 30 seconds, next due in 0 seconds
Invalid after 180 seconds, flushed after 300
Redistributing: rip
Default version control: rip version 1
Interface Version Key
Routing for Networks:
Routing Information Sources:
Gateway Last Update
Related Commands - OSPF
ip ospf authentication , ip ospf authentication-key , ip ospf cost , ip ospf dead-interval , ip ospf
hello-interval , ip ospf message-digest-key , ip ospf network point-to-multipoint , ip ospf priority , ip
ospf router-id , router ospf , show ip ospf , show ip ospf database , show ip ospf interface , show ip
ospf neighbor
Related Commands - RIP
ip distribution access-list , ip rip authentication key , ip rip authentication mode , ip rip
default-route-mode , ip rip poison-reverse , ip rip rip-version , ip rip send-receive-mode , ip rip
split-horizon , router rip
Packet sniffing
capture buffer-mode
Use the
capture buffer-mode
command to specify the type of buffer used by the packet
sniffer.
Syntax
capture buffer-mode {non_cyclic | cyclic}