Avaya G450 Manager, Справочное руководство CLI

Страница: 784 / 1334

CLI Commands Policy-based routing
784 Avaya G450 CLI Reference
Related Commands - Policy
composite-operation , destination-ip , dscp (policy) , icmp , show composite-operation , show
dscp-table , show isdn bri link , source-ip , tcp established , tcp source-port , udp destination-port ,
udp source-port
Related Commands - VPN
description (ip rule) , destination-ip , dscp (policy-based routing, packet sniffing, VPN) , fragment ,
icmp , ip crypto-list , ip-protocol , ip-rule (VPN) , local-address , protect crypto map , source-ip ,
show ip crypto-list , tcp source-port , udp destination-port , udp source-port
tcp source-port
Use the
tcp source-port
command to define a source port with the TCP protocol for which
to apply the current rule.
Use the
no
form of the command to set the TCP source port to
any
. If the protocol is not TCP,
the protocol is set to TCP and the destination port is set to its default value.
Use the
not
form of the command to specify that the rule applies to all TCP ports other than the
requested ports. If the protocol is not TCP, the protocol is set to TCP and the destination port is
set to its default value
Note:
Note:
Issuing this command also sets the protocol to be TCP, if it is not already.
Syntax
[not] tcp source-port any | {{eq | lt | gt} { port_name | port_number }}
| {range start_port end_port }
no tcp source-port
Parameters
Parameter Description Possible
Values Default
Value
any
Keyword that specifies to apply the rule to a port
with any name or number
eq
Keyword that specifies to apply the rule to a port
whose name or number matches exactly to the
specified name or number
lt
Keyword that specifies to apply the rule to a port
whose name or number is less than the specified
name or number