Avaya G450 Manager, Справочное руководство CLI

Страница: 366 / 1334

CLI Commands E1/T1 interfaces
366 Avaya G450 CLI Reference
linecode (T1)
Use the
linecode
command to specify the type of line-code transmission for the a T1 line. Use
the
no
form of the command to restore the default line-code value of b8zs .
Note:
Note:
Normally the T1 service provider determines which type of line-code is required
for your T1 circuit.
Syntax
linecode {ami|b8zs}
Parameters
User Level
read-write
Context
interface:Controller (T1)
Example
To set the line-code type to ami:
G450-001(super-controller:5/1)# linecode ami
Related Commands
clear controller counters , controller , cablelength long , cablelength short , channel-group , clock
source , ds-mode , fdl , framing , interface serial , ip address , linecode (E1) , loopback , remote ,
show controllers , show controllers remote , show ds-mode
Parameter Description Possible
Values Default
Value
ami
Keyword that specifies the Alternate Mode
Inversion line-code type
b8zs
Keyword that specifies the B8ZS line-code
type