Avaya G450 Manager, Справочное руководство CLI

Страница: 328 / 1334

CLI Commands Dialer interface
328 Avaya G450 CLI Reference
User Level
read-write
Context
interface:Dialer (L2, L2-L3)
Example
To set the redial interval to 20 seconds:
G450-001(if:Dialer 1)# dialer persistent delay 20
Related Commands
interface dialer , dialer modem-interface , dialer order , dialer persistent , dialer persistent initial
delay , dialer persistent max-attempts , dialer persistent re-enable , dialer string , dialer
wait-for-ipcp
dialer persistent initial delay
Use the
dialer persistent initial delay
command to set the minimum delay from
boot to persistent dialing. Use the
no
form of the command to return the delay to the default
value.
Note:
Note:
Use this command to prevent the Dialer interface from dialing out after the G450
is reset. This is needed because the primary interface does not become active
immediately after the reset.
Syntax
[no] dialer persistent initial delay sec
Parameters
User Level
read-write
Context
interface:Dialer (L2, L2-L3)
Parameter Description Possible
Values Default
Value
sec
Initial delay 1-1000 1