Avaya G450 Manager, Справочное руководство CLI

Страница: 781 / 1334

Policy-based routing
Issue 1 January 2008 781
Parameters
User Level
read-write
Context
ip pbr-list ip-rule, ip qos-list ip-rule, ip capture-list ip-rule, ip access-control-list ip-rule, ip
crypto-list ip-rule
Note:
Note:
The
not
form of the command is not relevant in the crypto-list ip-rule context.
Example
To specify that rule 22 of QoS policy list 460 applies to any packet coming from IP address
135.64.104.102:
G450-001(QoS 460/rule 22)# source-ip host 135.64.104.102
To specify that rule 22 of QoS policy list 460 applies to any packet except those coming from IP
address 135.64.104.102:
G450-001(QoS 460/rule 22)# not source-ip host 135.64.104.102
Related Commands - Policy-based routing
destination-ip , dscp (policy-based routing, packet sniffing, VPN) , icmp , ip-protocol , show ip
capture-list , tcp destination-port , tcp source-port , udp destination-port , udp source-port
Parameter Description Possible
Values Default
Value
host
Keyword that indicates a specific host IP
address
ip_address
The IP address of packets to which the rule
is applied
any
Keyword that indicates any IP address
ip_address
wildcard
The range of IP addresses of the rule.
The zero bits in the wildcard correspond to
bits in the IP address that remain fixed. The
one bits in the wildcard correspond to bits in
the IP address that can vary.
Note: This is the opposite of how bits are
used in a netmask.