Avaya G450 Manager, Справочное руководство CLI

Страница: 809 / 1334

PPP encapsulation
Issue 1 January 2008 809
Related Commands
show port point-to-point status
PPP encapsulation
interface serial
Use the
interface serial
command to enter Serial interface or sub interface configuration
mode. If the specified interface or sub interface does not exist, the system creates it and enters
its configuration mode.
Use the
no
form of the command to delete the interface. The
no
form can only be used to delete
sub L3 and sub frame relay interfaces. The command fails for USP interfaces and when higher
or lower layers are defined for that interface.
Syntax
[no] interface Serial module / if_number [ if_link_type ]
For USP interfaces
if_number
has the syntax:
port
[.
ip_interface
| {.
sub_interface
[.
ip_interface
]}]
For DS1 interfaces
if_number
has the syntax:
port
:
channel_group
[.
ip_interface
| {.
sub_interface
[.
ip_interface
]}]
Parameters
Speed Speed setting for the port — 10, 100, 1000
Type Port type, for example:
10/100BASE-TX, GBIC_SX, GBIC_LX, GBIC_not present, GBIC_unknown
Name Description
2 of 2
Parameter Description Possible
Values Default
Value
module
The interface module number
port
The port number of the interface