Avaya G450 Manager, Справочное руководство CLI

Страница: 134 / 1334

Roadmap
134 Avaya G450 CLI Reference
Spanning tree
interface
{console|dialer|
FastEthernet|
serial|tunnel|
USB-modem}
see
IP interface
configuration
Enter the context of the Console, Dialer,
FastEthernet, Serial, Tunnel, or USB-modem
interface
snmp trap
link-status
Enable or disable Link Up and Link Down traps
on an interface
snmp-server enable
notifications
Enable or disable the sending of all traps and
notifications from the G450
snmp-server host
Identify an SNMP management server, and
specify the kind of messages it receives. Use the
no
form of the command to remove the specified
server, or to disable a particular set of notification
types.
snmp-server
informs
Configure the SNMPv3 timeout and retries for
notifications
Table 87: SNMP trap configuration CLI commands (continued)
Root level command First level command Description
2 of 2
Table 88: Spanning tree CLI commands
Command Description
set port edge admin state
Assign or unassign RSTP edge-port admin state to a port
for Rapid Spanning Tree Protocol (RSTP) treatment
set port point-to-point
admin status
Specify a port’s connection type
set port spantree
Enable or disable spanning tree for specific ports
set port spantree cost
Set the spanning tree default path cost used by a port
set port spantree
force-protocol-migration
Force the port to send a rapid spanning tree hello packet
(Bridge Protocol Data Unit)
set port spantree priority
Set the spanning tree priority level of a port
1 of 2