Avaya G450 Manager, Справочное руководство CLI

Страница: 661 / 1334

Packet sniffing
Issue 1 January 2008 661
Note:
Note:
The
not
form of the command is not relevant in the crypto-list ip-rule context.
Example
To specify that rule 22 of QoS policy list 460 applies to any packet coming from IP address
135.64.104.102:
G450-001(QoS 460/rule 22)# source-ip host 135.64.104.102
To specify that rule 22 of QoS policy list 460 applies to any packet except those coming from IP
address 135.64.104.102:
G450-001(QoS 460/rule 22)# not source-ip host 135.64.104.102
Related Commands - Policy-based routing
destination-ip , dscp (policy-based routing, packet sniffing, VPN) , icmp , ip-protocol , show ip
capture-list , tcp destination-port , tcp source-port , udp destination-port , udp source-port
Related Commands - Policy
composite-operation , destination-ip , dscp (policy) , icmp , show composite-operation , show
dscp-table , show isdn bri link , tcp destination-port , tcp established , tcp source-port , udp
destination-port , udp source-port
Related Commands - VPN
description (ip rule) , destination-ip , ip crypto-list , ip-rule (VPN) , local-address , protect crypto
map , show ip crypto-list
tcp destination-port
Use the
tcp destination-port
command to define a destination port with the TCP protocol
for which to apply the current rule.
Use the
no
form of the command to set the TCP destination port to
any
. If the protocol is not
TCP, the protocol is set to TCP and the source port is set to its default value.
Use the
not
form of the command to specify that the rule applies to all TCP ports other than the
requested ports. If the protocol is not TCP, the protocol is set to TCP and the source port is set
to its default value
Note:
Note:
Issuing this command also sets the protocol to be TCP, if it is not already.
Syntax
[not] tcp destination-port any | {{eq | lt | gt}
{ port_name | port_number }} | {range start_port end_port }