Avaya G450 Manager, Справочное руководство CLI

Страница: 1014 / 1334

CLI Commands SLS survivability
1014 Avaya G450 CLI Reference
Context
sls > sig-group
Example
To identify a list of DS1 modules that are controlled by the primary D-channel for gateway 005,
module v5, and DS1 circuit number 0:
G450-001(sls-sig-group 100)# add nfas-interface 005v5 0
Related Commands
clear sig-group , remove nfas-interface , set associated-signaling , set primary-dchannel , set sls ,
set trunk-group-chan-select , show (sig-group) , show sig-group , show sls , sig-group , sls
remove nfas-interface
Use the
remove nfas-interface
command to remove a member from a NFAS-managed
DS1 group in SLS. This command removes the add nfas-interface gateway and module
administration.
Note:
Note:
This command applies only to ISDN-PRI trunks in a NFAS-managed group.
Note:
Note:
This command is not valid unless the slot configuration has already been
administered (see
set slot-config ) and the set associated-signaling command is
set to no (NFAS).
Syntax
remove nfas-interface gateway module
Parameters
User Level
read-write
Parameter Description Possible
Values Default
Value
gateway
3-digit gateway number (for example, 005)
module
2-character slot number (for example, v4). This
number identifies a port on an already-provisioned
DS1 board module (see
add port ).