Avaya G450 Manager, Справочное руководство CLI

Страница: 1083 / 1334

SNMP access configuration
Issue 1 January 2008 1083
User Level
admin
Context
general
Example
To create or configure a remote SNMPv3 user, with username john, associated with group
L2Group, and accessing engine
00:02:00:81:00:d0:00:4c:18:00
:
G450-001(super)# snmp-server remote-user john 00:02:00:81:00:d0:00:4c:18:00
L2Group
Related Commands - SNMP access configuration
ip snmp , set snmp community , set snmp retries , set snmp timeout , show snmp , show snmp
engineID , show snmp group , show snmp retries , show snmp timeout , show snmp user , show
snmp usertogroup , show snmp view , snmp-server community , snmp-server engineID ,
snmp-server group , snmp-server user , snmp-server view
Related Commands - SNMP trap configuration
set port trap , set snmp trap enable | disable auth , set snmp trap enable | disable frame-relay ,
show port trap , show snmp , snmp trap link-status , snmp-server enable notifications ,
snmp-server host , snmp-server informs
Related Commands - Dynamic trap manager
snmp-server dynamic-trap-manager
snmp-server user
Use the
snmp-server user
command to configure settings for an SNMPv3 user. If the user
does not exist, it is created. Use the
no
form of the command to remove the user from specific
groups. If no groups are specified, the user is removed from all groups.
Syntax
snmp-server user username groupname {{v1|v2c}|{v3 [auth {md5|sha}
auth-password [priv des56 priv-password ]]}}
no snmp-server user username [ groupname {v1|v2c|v3}]]