Avaya G450 Manager, Справочное руководство CLI

Страница: 1086 / 1334

CLI Commands SNMP trap configuration
1086 Avaya G450 CLI Reference
Context
general
Example
To configure settings for an SNMP MIB view named internet including Oidtree 1.3.6.1:
G450-001(super)# snmp-server view internet 1.3.6.1 included
Related Commands - SNMP access configuration
ip snmp , set snmp community , set snmp retries , set snmp timeout , show snmp , show snmp
engineID , show snmp group , show snmp retries , show snmp timeout , show snmp user , show
snmp usertogroup , show snmp view , snmp-server community , snmp-server engineID ,
snmp-server group , snmp-server remote-user , snmp-server user
Related Commands - SNMP trap configuration
set port trap , set snmp trap enable | disable auth , set snmp trap enable | disable frame-relay ,
show port trap , show snmp , snmp trap link-status , snmp-server enable notifications ,
snmp-server host , snmp-server informs
Related Commands - Dynamic trap manager
snmp-server dynamic-trap-manager
SNMP trap configuration
set port trap
Use the
set port trap
command to enable or disable generic SNMP uplink or downlink
traps from a port.
Syntax
set port trap module / port {enable|disable}