Avaya G450 Manager, Справочное руководство CLI

Страница: 1078 / 1334

CLI Commands SNMP access configuration
1078 Avaya G450 CLI Reference
Parameters
User Level
admin
Context
general
Example
To enable read-only access to SNMP services via the read-com community string and
read-write access to SNMP services via the write-com community string:
G450-001(super)# snmp-server community read-only read-com read-write write-com
Related Commands - SNMP access configuration
ip snmp , set snmp community , set snmp retries , set snmp timeout , show snmp , show snmp
engineID , show snmp group , show snmp retries , show snmp timeout , show snmp user , show
snmp usertogroup , show snmp view , snmp-server engineID , snmp-server group , snmp-server
remote-user , snmp-server user , snmp-server view
Related Commands - SNMP trap configuration
set port trap , set snmp trap enable | disable auth , set snmp trap enable | disable frame-relay ,
show port trap , show snmp , snmp trap link-status , snmp-server enable notifications ,
snmp-server host , snmp-server informs
Related Commands - Dynamic trap manager
snmp-server dynamic-trap-manager
snmp-server engineID
Use the
snmp-server engineID
command to specify the SNMP Engine ID for the G450.
Use the
no
form of the command to return the device to its default Engine ID.
Note:
Note:
The SNMP Engine ID must be unique for all devices on the network.
Parameter Description Possible
Values Default
Value
community-name
Assigns a read-only or read-write
community string