Avaya G450 Manager, Справочное руководство CLI

Страница: 1187 / 1334

VLAN configuration
Issue 1 January 2008 1187
Related Commands
clear port static-vlan , clear vlan , icc-vlan , interface vlan , set port static-vlan , set port vlan , set
trunk , set vlan , show cam vlan , show port vlan-binding-mode , show trunk , show vlan
set trunk
Use the
set trunk
command to configure the VLAN tagging mode of a port.
Syntax
set trunk module / port {off|dot1q}
Parameters
User Level
read-write
Context
general
Example
To configure 802.1q VLAN tagging for port 6/5 in the G450:
G450-001(super)# set trunk 6/5 dot1q
Dot1Q VLAN tagging set on port 6/5.
Parameter Description Possible
Values Default
Value
module
Number of the module
port
Number of the port on the module.
You can also specify a range of ports
separated by a dash, for example, 10/5-6 for
both ETH LAN ports 5-6 on the front panel.
off
Keyword that specifies to force the port to
become a non-tagging port and persuade
the neighboring port to become a
non-tagging port. The port becomes a
non-tagging port even if the neighbor port
does not agree to become a non-tagging
port.
dot1q
Keyword that specifies IEEE 802.1q tagging
on a Fast Ethernet or Gigabit Ethernet port