Avaya G450 Manager, Справочное руководство CLI

Страница: 541 / 1334

LLDP
Issue 1 January 2008 541
Example
To display the global LLDP configuration:
G450-001(super)# show lldp config
Lldp Configuration
-------------------
Application status: enable
Tx interval: 30 seconds
Tx hold multiplier: 4
Tx delay: 2 seconds
Reinit delay: 2 seconds
Output fields
Related Commands
set lldp re-init-delay , set lldp system-control , set lldp tx-delay , set lldp tx-hold-multiplier , set lldp
tx-interval , set port lldp , set port lldp tlv , show lldp , show port lldp config , show port lldp
vlan-name config
show port lldp config
Use the
show port lldp config
command to display port-level LLDP configuration.
Syntax:
show port lldp config [ module / port ]
Name Description
Application
status Whether the LLDP application is enabled or disabled
Tx interval The interval at which the device transmits LLDP frames
Tx hold
multiplier The value of the multiplier on the TxInterval that determines the
actual TTL value sent in an LLDP frame
Tx delay The minimum delay between successive LLDP frame
transmissions
Reinit delay The delay in seconds from when a port is set to LLDP "disable",
until re-initialization is attempted