Avaya G450 Manager, Справочное руководство CLI

Страница: 536 / 1334

CLI Commands LLDP
536 Avaya G450 CLI Reference
Context
general
Example
To set the LLDP status of port 10/3 to transmit and receive LLDP frames:
G450-001(super)# set port lldp 10/3 rx-and-tx
Related Commands
set lldp re-init-delay , set lldp system-control , set lldp tx-delay , set lldp tx-hold-multiplier , set lldp
tx-interval , set port lldp tlv , show lldp , show lldp config , show port lldp config , show port lldp
vlan-name config
set port lldp tlv
Use the
set port lldp tlv
command to enable or disable the transmission of the optional
TLVs on a per port basis.
The optional TLVs are:
●
Port description
●
System name
●
System description
●
System capabilities
●
Management address
●
Port-vlan-id
●
Vlan-name
Syntax:
set port lldp tlv module / port { enable | disable } { tlv-name |
vlan-name vlan-id }
Parameters
Parameter Description Possible Values Default
Value
module
Number of module 1-10
port
Number of port(s)