Avaya G450 Manager, Справочное руководство CLI

Страница: 922 / 1334

CLI Commands SLS survivability
922 Avaya G450 CLI Reference
Syntax
sls
User Level
read-write
Context
general
Example
To enter the
sls
context:
G450-001(super)# sls
G450-001(super-sls)#
Related Commands
bri , clear survivable-config , dial-pattern , ds1
,
incoming-routing , set sls , show sls , sig-group ,
station , trunk-group
set sls
Use the
set sls
command to enable or disable SLS.
Note:
Note:
If the SLS survivable call engine is currently running, you can issue this
command to stop SLS from operating.
Note:
Note:
If you enabled SLS and then entered additional administration, you must first
disable SLS and then re-enable it. This will cause the SLS application to
resynchronize its administrative database with the gateway's global CLI
command database.
Syntax
set sls {enable | disable}