Avaya G450 Manager, Справочное руководство CLI

Страница: 687 / 1334

Policy - access control lists
Issue 1 January 2008 687
Related Commands - Policy
composite-operation , dscp (policy) , show dscp-table , icmp , show composite-operation , show
isdn bri link , source-ip , tcp destination-port , tcp established , tcp source-port , udp
destination-port , udp source-port
Related Commands - VPN
description (ip rule) , ip crypto-list , ip-rule (VPN) , local-address , protect crypto map , source-ip ,
show ip crypto-list
dscp (policy)
Use the
dscp
command to specify the DSCP value that is set by the current policy operation.
Use the
not
form of the command to specify that the current operation set any DSCP value
other than requested value.
Use the
no
form of the command to specify that the current operation set the DSCP value to
no-change
.
Syntax
dscp { dscp_value | no-change}
not dscp dscp_value
no dscp
Parameters
User Level
read-write
Context
ip qos-list composite-operation
Parameter Description Possible
Values Default
Value
dscp_value
The DSCP value 0-63
no-change
Keyword indicating that the DSCP
value is left unchanged