Avaya G450 Manager, Справочное руководство CLI

Страница: 370 / 1334

CLI Commands E1/T1 interfaces
370 Avaya G450 CLI Reference
interface serial
Use the
interface serial
command to enter Serial interface or sub interface configuration
mode. If the specified interface or sub interface does not exist, the system creates it and enters
its configuration mode.
Use the
no
form of the command to delete the interface. The
no
form can only be used to delete
sub L3 and sub frame relay interfaces. The command fails for USP interfaces and when higher
or lower layers are defined for that interface.
Syntax
[no] interface Serial module / if_number [ if_link_type ]
For USP interfaces
if_number
has the syntax:
port
[.
ip_interface
| {.
sub_interface
[.
ip_interface
]}]
For DS1 interfaces
if_number
has the syntax:
port
:
channel_group
[.
ip_interface
| {.
sub_interface
[.
ip_interface
]}]
Parameters
User Level
read-write
Context
general, interface:Serial (FR SUB)
Parameter Description Possible
Values Default
Value
module
The interface module number
port
The port number of the interface
channel_group
For E1: 0-30
For T1: 0-23
sub_interface
1-127
ip_interface
0-1024
if_link_type
point-to-point