Avaya G450 Manager, Справочное руководство CLI

Страница: 382 / 1334

CLI Commands Ethernet port configuration
382 Avaya G450 CLI Reference
set port name
Use the
set port name
command to configure a name for a port. If you do not specify a
name, the port name displays as NO NAME .
Syntax
set port name module / port [ name ]
Parameter
User Level
read-write
Context
general
Example
To set the name of port 6/5 to “arthur”:
G450-001# set port name 6/5 arthur
Port 6/5 name set.
Note:
Note:
If you wish to define a name which includes spaces, you must enclose the entire
name in quotation marks, for example “new york”.
Parameter Description Possible
Values Default
Value
module
Number of the module
port
Number of the port on the module.
You can also specify a range of ports
separated by a dash, for example, 10/5-6 for
both ETH LAN ports 5-6 on the front panel.
name
The port name maximum
16-character
string