Avaya G450 Manager, Справочное руководство CLI

Страница: 965 / 1334

SLS survivability
Issue 1 January 2008 965
set bit-rate
Use the
set bit-rate
command to set the maximum transmission rate for the DS1 facility in
SLS.
Note:
Note:
This command is only valid for DS1.
If this command is invoked to change the transmission rate and the DS1 facility
and associated signaling group have already been provisioned, the command is
blocked and a warning message, "Administrative change is in violation with
existing trunk member provisioning", is displayed.
Syntax
set bit-rate rate
Parameters
User Level
read-write
Context
sls > ds1
Example
To set the maximum transmission rate to 2.048 Mbps:
G450-001 (sls-ds1-<port address>)# set bit-rate 2048
Related Commands
clear ds1 , set bearer-capability , set bit-rate , set channel-numbering , set connect , set
country-protocol , set interface , set interface-companding , set long-timer , set name , set
protocol-version , set side , set signaling-mode , set sls , show (ds1) , show ds1 , show sls , sls
Parameter Description Possible
Values Default
Value
rate
The maximum transmission rate for the DS1 facility:
●
1544 – Sets the transmission rate at 1.544 Mbps (T1)
●
2048 – Sets the transmission rate at 2.048 Mbps (E1)
1544
2048 1544